Welding Tools & Accessories

ESAB Pre–Weld anti spatter

The ESAB Pre–Weld fluid is so much more then a traditional anti spatter. ESAB have managed to develop a product that has a much higher concentration of the active substance then any other product available. The product does not evaporate off the work piece, it gives extraordinary protection all the way from the very edge of the weld and out on the work piece. But still the product is vegetable oil and completely safe, no dangerous/harmful substances are included. The fluid is absolutely silicon free and water–soluble, there are no problems painting or doing any other after treatments.

The spray can contain 600 ml of active fluid, no solvents. The fluid is kept in an aluminium bag inside the can. The pressure surrounding the bag forces the fluid out when the valve is opened. This allows the can to be sprayed at an angle and still allows you to get every drop out of the can. Note that it’s only active fluid that comes out, this is what makes the product so efficient.

When welding stainless steel the ESAB Pre–Weld can eliminate the need of pickling paste. If the fluid is applied before welding and again when the material has cooled down, the discolouring can be removed by using just a non–abrasive piece of material.

ESAB Jig and Tool protection

The ESAB Jig and Tool protection prolongs the lifetime of the welding shroud and contact tip as well as gives an extremely good protection for tools and jigs. The spray dries quickly and leaves a heat resistant layer (1300 degrees C) and it does not burn off. Hardly any spatter sticks to the surface and if it does, a gentle wipe with the glove will remove it.

TIG PEN™

The TIG PEN™ allows the welder to control the tip of the filler wire with great accuracy even at a long distance from the weld seam and in the process helps the welder to obtain a higher quality weld. It also eliminates waste of the filler wire. The TIG Pen can be used with any wire diameter from 1.0 to 3.2mm

Chipping hammer SH2 and SH3

The SH2 chipping hammer is made of special high–quality steel, and has a user-friendly handle. The SH3 is a small hammer with a chisel and tip and steel handle with a plastic grip.