Welding & Cutting Equipment

Origo™ Tig 3000i AC/DC, TA24 AC/DC

In both DC and AC mode this TIG welding machine will give an excellent start and stable arc. All types of material and thickness can be welded with the highest quality.

• Designed for quality TIG–welding in all types of material.
• QWave™ – enables AC welding with high arc stabliity and low noise.
• AC frequency and balance control optimizes weld pool.
• DC pulsed TIG welding gives easy control of heat input.
• ESAB 2–program function. Possibility to pre–program and change program during welding.
• Easy to use. All parameters presented in an easily comprehensible way.
• MMA welding: Hot start, arc force and polarity switch.

Caddy® Tig 2200i AC/DC

Compact and portable inverter for AC/DC TIG welding, with HF or LiftArc™ start, and MMA.

• Durable and impact resistant design with OKC 50 cable connectors.
• Easy to operate.
• Digital display for settings.
• Plate thickness setting for TIG (TA33 AC/DC). Set the plate thickness and the machine will control the welding parameters.
• Adjustable slope down and gas post–flow (TA33 AC/DC).
• DC Pulsed TIG (TA34 AC/DC) giving increased control of heat input and weld pool.
• Two memories (TA34 AC/DC) for storing of settings.
• Micro Pulse (TA34 AC/DC) minimizing heat affected zone especially on thin material.
• Adjustable slope up/down and gas post–flow (TA34 AC/DC).
• Remote control possibility.
• ArcPlus II regulator for better MMA welding characteristics.
• Higher weld quality with less after treatment.
• Alll types of material, including aluminium, and thickness up to 5 mm.
• Can operate with extra mains cables, over 100 m, thanks to the built–in PFC circuit.
• IP 23 – designed for outdoor use making it safe on all work sites.